Видео

Thanks ... Still helpful ..in Times this knowledge disappears ..

Best carburetor explanation ever.

Great video John, as usual. But you make this look sooo easy. I've spent the entire day trying to keep the rails together while I attach them to the wooden strip and frame. No joy in Columbus today, but tomorrow is another day. Keep up the great work!

John, You make this look sooooo easy. I've spent the entire day trying to put in a seat with no success. Keeping the rails together while trying to attach them to the wooden strip and frame isn't as easy as your video shows. Oh well, tomorrows another day. Thanks for all your videos. Safety Fast!

"restoration" my asshole, just spraying over corrosion lmao

Thanks John/ your expertise will be valuable for many years 👍 thanks again for your information and humor!!

The faux walnut dash is an acquired taste……but not keen on the upside down over riders

My rotor won't point to No 1cyl

Perfect one heck of a teacher, thanks for the help. Now off to repair a 1980 Cj sending unit. 🎉

Does this timing method work on a MGB as the example is on an MGA? Thank you!

My distributor must run on magic.....??? No light on nor off when moved.... must be johns worst video.... will stick to the timing light.

I just welded up one like yours out of 1 inch steel tube and hope to try it out on my MG tc 1949 didn’t think about moving the car beck and forth thanks great video

Tq sir...this video help me alot

John..Mines backfiring from the exhaust and wont fire since the engine rebuild. Hopefully this is causing the problem . Thanks

Pencil eraser cleans it to.

Really useful video, thanks. Hope you are still well after 10 years

John, just checked out your video on the MGC GT suspension from 2013. Glad to see you're still making videos here, thanks for teaching me about these cars!

Mr. Twist, what if you store your MG on steel dollies that have a curve that conforms to the tire shape?

Is the front crossmember meant to be symmetric left to right? Doesn't look like mine is, though a bit hard to tell

I've only just discovered this channel and how brilliant it is!!! By far the best re working and tips on MGs from the brilliant John Twist.

My first car was a red 1963 1100 with gray leather that cost me about $350. Had to tow it home as the transmission case on the bottom of the engine was cracked. Drove great after our DIY repairs but eventually I lost reverse, and then 1st gears, which explained what the few extra washers and springs we had left over were for! Luckily it was light enough to start like a scooter, with one leg out the door, and then compression start downhill. I then let the oil get too low and scored the engine, reducing top speed to about 35 or 40 mph. Nevertheless, I was able to sell it with an ad in the L.A. Times for a hundred or two. A couple weeks later the FBI knocked on our door. When I showed them my improvised bill of sale they left, but I asked why they were looking for the car. As God is my witness they said, “because it was used in a bank robbery”!!!

Great video.

Great video

my part number appears to be a 41491 made in 02 74. is this where I look to see if it is a '4897'? i.e. do I need to look elsewhere or if I have a 4897 is this where it would be marked?

Great explanation & demonstration.

I could not get my charcoal to burn, but it seemed dirty and so I put it in a pan with acetone and the acetone turned brown and dirty. I repeated this quite a few times getting some kind of brown substance each time. So I don't know if some dirty oil got into that cannister or what.

6/16 the duhh😂

Love you channel, easy to follow and very informative

Does this procedure apply to a gearbox with Overdrive?

I have over 100k miles on my O/D gearbox & it wasn't new when I fitted it (original box is non O/D). Apart from changing the oil & the O/D filter & the nylon bush for the gearstick I haven't had to touch it in all those miles. The shift on the box is the best I've had & I normally encounter poor synchros after extended miles on Triumph & Ford boxes but this box just keeps going. Its only downside is weight but then the rest of MGB is built like a tank.

Are you still helping people? If so I have a problem. I am restoring a MG MGB 1979 the problem I have is the people before me took the top off the thermostat housing to get water to the choke. I replaced the housing with a new one and I have been trying to find the right place to hook up the hose coming from my Zenith carburetor. All the picture show the hose going off the back of the block but I do not see anyplace that I can use. Please help me.

I tried everything then I changed the radiator and boom! All set, it was the radiator all the time.

Excellent video, well worth watching (although I refrained from refurbing myself in favour of just buying brandnew calipers instead). Gearboxes and just these front calipers frighten me, fortunately the rest of the B mechanisms does not 😀

Hi. Great video! Love the deep explanation about inside that box. Didn't understood very well ( not my main language) but the thin wire could be replace with other thin wire? Why I need to keep the old one their?

Great video bud!

Are these similar to SU Carbs on the Datsun Roadsters? I have never heard of MG are they collectable? How are they on reliability? Are they known to leak? I have always wanted a Datsun Roadster since I was a kid but if these MG’s are less expensive maybe I will settle.

I lost a wheel - TWICE! I was young and dumb. The car was NOT an MG but an Alpine. The failure was with a loud "scrunch" from the left front hub. I stopped, Inspected, reattached the wheel and proceeded onward. Got back to the dorm parking lot and decided to "test" my non-repair. Got up to 30 mph, jammed on the brakes and BUMP. The wheel departed the hub. Came to an abrupt halt yet the tire proceeded to bound another 100 yards --- right into the left rear flank of a brand-new Impala. Oops!!! I got a replacement form the junkyard, changed the hub in a snowstorm and lived a good life thereafter.

John uses no "TLC" whatsoever! I do stuff on my car with "kid gloves" and i still break things😂😂

OK but how do you fit the rubber bushes into the butterfly thing?!

Excellent instructional video!!!

So I' getting too much voltage to the battery (15.5v or more), which direction to turn the Voltage bobbin dial to lower the voltage?

16 years and still helping us 1st timers

I love the look of that mini , It's just made to drive and have fun in and not having to worry about scratches or dings. I'm so done with all the 'perfection' on everything around me , as I get older it all seems like a wast of time to persue this while you could just be having fun. 😏

I repaired a "closed cell foam" float by drilling a hole in it just large enough for an automotive marker lamp (baseless bulb about 1/2" OD) Buoyancy regained and gage works great again. Drill hole slightly undersized for a tight press fit of the bulb glass into the foam.

Great story, John!!

John, thanks for the wonderful review of my Undo-Stick! FYI you didn't have to roll the car when you couldn't get the tool on the knock-off. You just had to flip it around 180deg and it would have worked fine. Live and learn right? Thanks again

Why can’t we arch the shoes like the old days

What size is restricter on valve cover on 1979 mgb

My car mg gt 2022. So my car is problem for Gair I started car and pote tha Gair for d is not goon for d or r

Sar